Optoma W505 Betriebsanweisung PDF herunterladen (Seite 75)

English

Troubleshooting

If you experience a problem with your projector, please refer to the

following information. If a problem persists, please contact your local

reseller or service center.

Image Problems

No image appears on-screen

Ensure all the cables and power connections are correctly and

securely connected as described in the Installation section.

Ensure all the pins of connectors are not bent or broken.

Check if the projection lamp has been securely installed. Please

refer to the Replacing the Lamp section.

Make sure you have removed the lens cap and the projector is

switched on.

Partial, scrolling or incorrectly displayed image

Press Re-Sync on the remote.

If you are using a PC:

For Windows 95, 98, 2000, XP:

1. Open the My Computer icon, the Control Panel folder, and

then double click on the Display icon.

2. Select the Settings tab.

3. Verify that your display resolution setting is lower than or

equal to UXGA (1600 x 1200).

4. Click on the Advanced Properties button.

If the projector is still not projecting the whole image, you

will also need to change the monitor display you are using.

Refer to the following steps.

5. Verify the resolution setting is lower than or equal to UXGA

(1600 x 1200).

6. Select the Change button under the Monitor tab.

7. Click on Show all devices. Next, select Standard monitor

types under the SP box; choose the resolution mode you

need under the “Models” box.

8. Verify that the resolution setting of the monitor display is

lower than or equal to UXGA (1600 x 1200). (*)

Appendices

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 100 101

Keine Kommentare

Optoma W505 Betriebsanweisung Seite 75